Mechanical Design Wood Chips Rotary Dryer Malaysia

The rotary dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer is inclined to slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity.

Product Features

1. Need large quantity of material for drying.

2. Level of mechanization is high, and capacity is large.

3. The resistance for fluid to pass through drum is low, and energy consumption is low.

4. Good adaptalility to the characters of materials.

5. Operation is stable, operating cost is low, uniformity of dried product is good.

Product Working Principle

When the damp raw material is fed from one terminal, it is turned over through blades that are distributed inside the cylinder and will be distributed uniformly in the drier and contact fully with the counter current hot air. In this way, the process of heat conduction is increased. During the period of dry, inder the effect of incine blades and hot air steam, raw material can be moved to dried and discharged from discharged form discharging valve.

Product Application

Rotary Dryers have many applications but are most commonly seen in the mineral industry for drying sands, limestone, stones and soil, ores, fertilizers, wood chips, coal, iron sulfate, filter cakes, sewage sludge, etc.

Technical Parameters

Item	Productive capacity(t/h)	Revolution(r/min)	Motor power(kw)	Install angle(o)	Temp. of final
Ø1.0x5.0	0.5-1.2	0.6-6	4	3-5	<1.5%
Ø1.2x6-10	1.5-3	0.6-6	5.5	3-5	<1.5%
Ø1.5x12-18	3-5.5	0.6-6	15	3-5	<1.5%
Ø1.8x12-18	5-6.5	0.6-6	18.5	3-5	<1.5%
Ø2.2x12-22	7-12	0.6-6	22	3-5	<1.5%
Ø2.4x15-20	9-15	0.6-6	30	3-5	<1.5%
Ø3.0x25	16	0.6-6	55	3-5	<1.5%

Production Show

Contact us

electrical, steam, natural gas or other

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.